You are here >> All products >> EL Panel >> Photography >> Moisture-proof film
Product Code:
Moisture-proof film

Moisture-proof film

Your current location: Home / PRODUCTS

Graphene Flexible Electro Heating Film
Transparent and moisture-proof PET film to prevent hydrone


Usage: OLED panel, solar thin-film batteries, electronic devices, pharmaceutical packaging, etc., to protect the seal to prevent moisture penetration.Protect to prevent moisture in the air to permeate.


Significance:Increase the lifetime of devices in humid environment by 1-5 times.

Principle:It was prepared with special separating molecular penetrating

layer on the surface of PET film.

Using:By film heat pressing machine,glue and seal them.Or by sealing machine for hot pressing film,hot melt film and seal them.

Specification:The width is 1.120m,  length is 200m/roll and light transmittance is above 80%. Material is special PET.

Film:The thickness is about 0.125mm. The width of edge banding is suggested to be bigger than 2mm.

Storage:Preserve for more than 10 years at room temperature 23 degree.Preserve for more than 5 years in ordinary environment (The adhesion power of gluing may decrease).Before using,electronic drying cabinet should be dry and keep for 48 hours.

  • On a product: Graphene Flexible Electro Heating Film

  • Next product: Photonic crystal color changing material
  • Hits:1  Entry Time:2/13/2020 【Print this page】 【Close
    Copyright: Suzhou Long-Show Photoelectric Technology Inc. Tel :86-512 -51910068
    electroluminescent_backlight_el lamps_electro luminescent_el sheet_el lighting_el inverter_el panel sheet_el panels_el wire_electro luminescent_electroluminescent
    tape_el panel_light wire_el tshirt_El manufacture machine_El technology training