Fabrication manual
Split Electrode Panels and Strips
.com
Lighted Surface
NOTE: All cut edges should be sealed, to prevent electrical shock or moisture migration.
LuminousFilm.com
Connections:
One connector is positioned on each side of the center scribe line
Compress eyelet and apply insullation.
Electroluminescent lamps are high voltage devices!
Place connectors anywhere on each side of the center line. One pair of Etco connectors for each 5,000
square inches of electroluminescent lamp area, or one pair 3mm eyelets for up to 1000 square inches.
Etco Eyelet
Cutting:
NOTE: All cut edges should be sealed, to prevent electrical shock or moisture migration.
No
Yes No
LuminousFilm.com
The shape and area should be symetrical to the scribe line for uniform luminance.
Yes No
NOTE: All cut edges should be sealed, to prevent electrical shock or moisture migration.
